![Guitar Kill Switch [10mm] on a white background](https://analogclassics.com/wp-content/uploads/2021/10/guitar-kill-switch-button-10mm-3.jpg "Guitar Kill Switch [10mm]")
![Guitar Kill Switch [10mm] on a white background](https://analogclassics.com/wp-content/uploads/2021/10/guitar-kill-switch-button-10mm-2.jpg "Guitar Kill Switch [10mm]")
![Guitar Kill Switch [10mm] on a white background](https://analogclassics.com/wp-content/uploads/2021/10/guitar-kill-switch-button-10mm-1.jpg "Guitar Kill Switch [10mm]")
![Guitar Kill Switch [10mm] on a white background](https://analogclassics.com/wp-content/uploads/2021/10/guitar-kill-switch-button-10mm-3-75x75.jpg "Guitar Kill Switch [10mm]")
![Guitar Kill Switch [10mm] on a white background](https://analogclassics.com/wp-content/uploads/2021/10/guitar-kill-switch-button-10mm-2-75x75.jpg "Guitar Kill Switch [10mm]")
![Guitar Kill Switch [10mm] on a white background](https://analogclassics.com/wp-content/uploads/2021/10/guitar-kill-switch-button-10mm-1-75x75.jpg "Guitar Kill Switch [10mm]")
![Guitar Kill Switch [10mm] on a white background](https://analogclassics.com/wp-content/uploads/2023/05/pixelcut_1-5-300x300.png "Guitar Kill Switch [10mm]"){kind=tracking}
![Guitar Kill Switch [10mm] on a white background](https://analogclassics.com/wp-content/uploads/2021/10/DBX-34-0159-A-Fader-Cap-2-300x300.jpg "Guitar Kill Switch [10mm]")
Analog Classics pushbutton switches are perfectly suited for use as a guitar kill switch to achieve a stutter effect. This switch will fit in a standard 3/8″ potentiometer hole with no drilling required for easy installation. To wire correctly, use the center and “NC” pins (use an ohm meter to determine which one of the two outer pins this is). The switch is constructed from stainless steel and is rated for over 500,000 cycles. Mounting nut is included.
![DPDT On-On Mini Toggle Switch [Flat Bat] on a white background](https://analogclassics.com/wp-content/uploads/2021/07/flat_toggle-scaled-2-1-300x300.jpg "DPDT On-On Mini Toggle Switch [Flat Bat]")
