This Yamaha SU700 function knob encoder is a compatible replacement for the 12 encoders located towards the bottom of the unit. Some wiring is required as the pins are not the same as the OEM encoder which has been long discontinued. Please refer to the “Required Wiring Mods” tab for modification info.
Yamaha SU700 Encoder [function, replaces VU594400]
Out of stock
Notify when available:
|Dimensions||1 × 0.75 × 0.5 in|
Required Wiring Mods
Because our encoder is 3 pins as opposed to the original 4 pins, it is not a direct fit replacement part. Jumper wires will have to be used as pictured below. This will not affect the performance of the unit.