Battery Replacement for the Lexicon MPX R1.
Replace batteries easily in the future. Solder the red wire to the hole where the positive pin of the original battery was and the black to the negative. Instead of unsoldering/resoldering a new battery cell each time the batteries need to be replaced, you can simply pop out the old commonly available CR2032 coin cell and pop in a new one. Each holder comes with a piece of double-sided foam tape for secure mounting in a location of your choice. You must ensure the back of the PCB does not short out if you mount it on a metal surface, so place the included double-sided foam tape carefully. The battery leads can be easily disconnected via the 2-pin connector for even easier battery changes. A fresh CR2032 coin cell is included and comes pre-installed.