Yamaha SU700 Function Knob Encoder

Description

This Yamaha SU700 encoder is a compatible replacement for the 12 encoders located towards the bottom of the unit.  Some wiring is required as the pins are not the same as the OEM encoder which has been long discontinued.  Please refer to the “Required Wiring Mods” tab for modification info.

• Bend pins on new encoder so they are pointing straight out.
• Wire pin 1 to hole 3.  Pin 2 to hole 1.  Pin 3 to hole 4.
• Bend mounting clips on encoder out a bit to fit into holes on PCB.

Additional information